Brunton Multi-Navigator Spezifikationen PDF herunterladen (Seite 82)

At the time of writing this document GPS software Versions

2.12

and

2.13

are available for

download and installing into your GPS from these sites.

Version 2.13 is available from

www.silva.se

but you need the Global Map Planner software to install

it.

Version 2.12 is available from

www.brunton.com

and comes with its own installer software.

It appears to be possible to use the installer software from Brunton to install the file available from

Silva (we tried it and it worked ok).

OziExplorer Configuration Setting

Go to the GPS tab on the Configuration dialog

2. Using GPS Make combo box select

Brunton / Silva

In the GPS Model combo box there is only one mode which can be selected (the Multi

Navigator).

In the GPS Symbol Set combo box leave it set to

Garmin Symbols

. The Brunton / Silva does

not use symbols for waypoints.

Adjust the GPS Parameters to match the specification of your model of GPS. These

parameters may be mentioned in the manual. If unsure leave them as they are as the most

likely set of parameters has already been selected. Brunton / Silva GPS receivers do not have

Events (one of the parameters), this can be set to 500 so they can be used as markers on the

map.

Set the GPS Upload/Download Datum to WGS 84 regardless of the datum setting in the GPS.

Set the GPS NMEA Output Datum to WGS 84 regardless of the datum setting in the GPS.

Goto the

Comms tab

on the Configuration dialog.

9. Select the Comm Port Number to match the one you are using on the PC

10.

Set Parity to none

11. Set Stop bits to 1.

12. Set the Upload/Download Baud rate to 4800 or 19200.

Note

Only baud rates of 4800 or

19200 can be used. It is best to use

19200

for faster upload/download speeds but we have

found that 19200 is not always as reliable when the GPS is busy with other tasks (finding

satellites for instance

see special notes below).

13.

The NMEA Baud rate must be set to 4800.

14.

Do not alter the AutoPilot settings unless required.

Special Notes

To make

Upload to the GPS more reliable and faster

it is suggested that the GPS Receiver engine

of the GPS be turned

OFF

before uploading to the GPS.

To turn the GPS engine off

Press the

DOWN

arrow (middle bottom button) until you are on the

POSITION

screen press the

YES

button (lower left), this will present a screen with

TURN OFF

GPS

on it, press the

YES

button, the GPS receiver engine is now turned OFF.

Track Download

When set to log track points in a TIME mode the GPS will log points even when it does not have a

position fix. OziExplorer will "reject" these points during the download process. Therefore the

number of points kept in the downloaded track may not be the same number that is downloaded.

Track Upload

Page

252

OziExplorer Help Contents

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 251 252

Kommentare zu diesen Handbüchern

Keine Kommentare

Brunton Multi-Navigator Spezifikationen Seite 82

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Brunton Multi-Navigator