Brunton Atlas MNS Spezifikationen PDF herunterladen (Seite 71)

Create Waypoint at Current Position

1. While you are traveling, press ENT|ENT. The waypoint is saved and

automatically given a name with a sequential number, such as "waypoint

002." The waypoint symbol and number appear on the map.

Create a Home Waypoint

This unit has a Home feature that shows navigation data to the location

where the feature was activated. To activate it, press the

ZOUT and ZIN

keys at the same time. Your position at the time these keys are pressed is

used as the Home position. The unit automatically begins navigating to the

Home waypoint. For further details, see this subject in the Easy Mode Op-

eration section.

Create a Waypoint by Average Position

This feature sets a waypoint at the current position after taking several po-

sition readings and averaging them. This boosts waypoint position accu-

racy by helping to eliminate errors caused by atmospheric conditions and

other factors.

1. Press

ENT|↓ to AVERAGE POSITION|ENT|(cursor jumps to highlight CRE-

ATE

)|ENT.

2. Wait while the unit takes points to average for the position. (The greater the

number of points, the greater the accuracy.) When the desired number of

points accumulates, press

ENT to create and save the waypoint.

3. The Edit Waypoint menu appears. You can simply save the waypoint by

pressing

EXIT|EXIT or you can edit the waypoint.

Create a Waypoint by Projecting a Position

This feature sets a waypoint at a point located a specific distance and

bearing from a reference position. The reference position can be selected

from your waypoint list, a map feature or from the Points of Interest list.

1. Press

ENT|↓ to PROJECTED POSITION|ENT|(cursor jumps to highlight CRE-

ATE

)|ENT.

2. Press ↓ to

SET REFERENCE|ENT. Use ↑ and ↓ to select a waypoint, map

feature or Point of Interest. When the point has been selected, press ENT

and the point's position appears as the reference position.

3. Press ↑ to

DISTANCE|ENT. Press ↑ or ↓ to change the first character, then

press → to the next character and repeat until the distance is correct.

Press

ENT.

4. Press ↑ to

BEARING|ENT. Press ↑ or ↓ to change the first character, then

press → to the next character and repeat until the bearing is correct. Press

ENT.

5. Press ↓ to

PROJECT|ENT. The Edit Waypoint menu appears. You can

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 127 128

Kommentare zu diesen Handbüchern

Keine Kommentare

Brunton Atlas MNS Spezifikationen Seite 71

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Brunton Atlas MNS